Find a Service Center
Alternate Products
- 8 in Shaft Diameter
- 10 in Housing Bore Diameter
- 15 mm Overall Width
- Nitrile Rubber (NBR) Lip Material
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Pressure | 10 psi |
| Operating Temperature [Max] | 210 °F |
| Cover/Compensation Ring/Plate Required | No |
| Housing Bore Dia. | 10.5 in |
| Case Construction | Steel Case w/Inner Case |
| Surface Speed [Nom] | 3,600 ft/min |
| Installation | Housing Press Fit |
| Seal Design | SKF Wave |
| Operating Temperature [Min] | -40 °F |
| Overall Width | 0.625 in |
| Speed | 0.07 ft/min |
| Temperature Range [Max] | 225 °F |
| Inch/Metric | Inch |
| Spring Material | Carbon Steel Garter |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3000 |
| Solid | Yes |
| Temperature Range [Min] | -40 °F |
| Seal Type | Oil |
| Lip Material | Nitrile Rubber (NBR) |
| Seal Application | General Purpose |
| Shaft Dia. | 8.5 in |
| Case Design | Metal Case, Inner Case |
| Material | Alloy Steel |
| Lubricant | Oil or Grease |
| Construction | CRWH1 |
| Design | CRWH1 |
| Lip Style | Internal |
| Lip Type | Single Lip |
| Overall Length | 9.84 in |
| Finish | Full Polish Chrome |
| Length Type | Extra Long |
| No. of Points | 12 |
| No. of Teeth | 72 |
| Weight | 2.063 LB |
| EAN or UPC | 85311040235 |
