Find a Service Center
- Radial Shaft Seal
- 90 mm Shaft Diameter
- 110 mm Housing Bore Diameter
- 8 mm Width
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. The seals have an outer covering of steel or elastomer, designed to fit the housing bore. The sealing lip is made of elastomer or thermoplastic for best sealing against the rotating shaft. A garter spring in the seal optimizes the sealing against the shaft.
features
- Many variants
- Easy installation
| Temperature Range [Min] | -22 °F |
| Inch/Metric | Metric |
| Seal Design | Standard |
| Housing Bore Dia. | 110 mm |
| Overall Width | 8 mm |
| Spring Material | Carbon Steel Garter |
| Construction | HMS4 |
| Case Construction | Rubber Covered Steel Case |
| Pressure | 10 psi |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@1000-3600 |
| Seal Type | Grease |
| Shaft Dia. | 90 mm |
| Temperature Range [Max] | 230 °F |
| Seal Application | General Purpose |
| Lip Style | Internal |
| Lip Type | Single Lip w/Spring |
| Lip Material | Nitrile Rubber (NBR) |
| Cover/Compensation Ring/Plate Required | No |
| Weight | 0.265 LB |
| EAN or UPC | 85311236836 |
