Find a Service Center
Alternate Products
- 9.25 in Shaft Diameter
- 11 in Housing Bore Diameter
- 0.63 in Overall Width
- Carboxylated Nitrile Rubber (XNBR) Lip Material
- Inch
description
- Metal clad seal has single spring-loaded sealing element with Duralip (was leather) exclusion element. Used where there is insufficient room for two seals. HDSA and HDSBare used to retain lubricants and exclude dirt in applications not wide enough to hold two seals.
| Spring Material | Stainless Steel |
| Construction | HDS3 |
| Surface Speed [Nom] | 5,000 ft/min |
| Seal Application | General Purpose |
| Operating Temperature [Max] | 210 °F |
| Shaft Dia. | 9.25 in, 234.95 mm |
| Overall Width | 0.63 in, 15.88 mm |
| Temperature Range [Min] | -40 °F |
| Housing Bore Dia. | 11 in, 279.4 mm |
| Lip Type | Single Lip |
| Operating Temperature [Min] | -40 °F |
| Case Material | Steel |
| Speed | 0.1 ft/min |
| Temperature Range [Max] | 250 °F |
| Spring Type | Garter Spring Cover |
| Installation | Housing Press Fit |
| Design | HDS3 |
| Lubricant | Oil or Grease |
| Lip Style | Internal |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.062 Max |
| Lip Material | Carboxylated Nitrile Rubber (XNBR) |
| Pressure | 15 psi |
| Case Design | Metal Case, Spacer Lugs |
| Case Construction | Steel Case w/Inner Case w/4 Adjustable Lugs |
| Seal Design | Assembled Design |
| Cover/Compensation Ring/Plate Required | No |
| Inch/Metric | Inch |
| Weight | 3.815 LB |
| EAN or UPC | 85311089425 |
