Find a Service Center
Alternate Products
- 0.938 in Shaft Diameter
- 1.828 in Housing Bore
- 0.25 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Case Design | Metal Case |
| Speed | 0.07 ft/min |
| Surface Speed [Nom] | 1,106 ft/min |
| Cover/Compensation Ring/Plate Required | No |
| Lip Material | Nitrile Rubber (NBR) |
| Spring Material | Carbon Steel |
| Housing Bore Dia. | 1.828 in |
| Spring Type | Garter |
| Design | CRW1 |
| Pressure | 10 psi |
| Seal Application | General Purpose |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Overall Width | 0.25 in |
| Solid | Yes |
| Operating Temperature [Min] | -40 °F |
| Lubricant | Oil or Grease |
| Operating Temperature [Max] | 210 °F |
| Inch/Metric | Inch |
| Seal Type | Oil |
| Installation | Housing Press Fit |
| Case Construction | Steel Case w/o Inner Case |
| Temperature Range [Max] | 225 °F |
| Temperature Range [Min] | -65 °F |
| Lip Style | Internal |
| Construction | CRW1 |
| Bore Sealant | Bore Tite |
| Case Material | Steel |
| Shaft Dia. | 0.938 in |
| Lip Type | Single Lip |
| Seal Design | SKF Wave |
| Weight | 0.082 LB |
| EAN or UPC | 85311007313 |
