Find a Service Center
Alternate Products
- 9.5 in Shaft Diameter
- 11.5 in Housing Bore
- 0.625 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Case Design | Metal Case |
| Lip Style | Internal |
| Lip Type | Single Lip |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Installation | Housing Press Fit |
| Spring Material | Carbon Steel Garter |
| Seal Application | General Purpose |
| Temperature Range [Max] | 225 °F |
| Temperature Range [Min] | -65 °F |
| Operating Temperature [Min] | -40 °F |
| Seal Design | SKF Wave |
| Design | CRW1 |
| Case Construction | Steel Case w/o Inner Case |
| Speed | 0.07 ft/min |
| Pressure | 10 psi |
| Cover/Compensation Ring/Plate Required | No |
| Shaft Dia. | 9.5 in |
| Inch/Metric | Inch |
| Housing Bore Dia. | 11.5 in |
| Lip Material | Nitrile Rubber (NBR) |
| Construction | CRW1 |
| Lubricant | Oil or Grease |
| Solid | Yes |
| Overall Width | 0.625 in |
| Seal Type | Oil |
| Operating Temperature [Max] | 210 °F |
| Weight | 1.346 LB |
| EAN or UPC | 85311040884 |
