Find a Service Center
Alternate Products
- 9.5 in Shaft Diameter
- 11.5 in Housing Bore
- 0.625 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Lip Type | Single Lip |
| Installation | Housing Press Fit |
| Operating Temperature [Max] | 210 °F |
| Seal Application | General Purpose |
| Construction | CRW1 |
| Temperature Range [Max] | 225 °F |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Pressure | 10 psi |
| Lubricant | Oil or Grease |
| Housing Bore Dia. | 11.5 in |
| Shaft Dia. | 9.5 in |
| Solid | Yes |
| Overall Width | 0.625 in |
| Seal Design | SKF Wave |
| Cover/Compensation Ring/Plate Required | No |
| Inch/Metric | Inch |
| Lip Style | Internal |
| Speed | 0.07 ft/min |
| Case Design | Metal Case |
| Spring Material | Carbon Steel Garter |
| Temperature Range [Min] | -65 °F |
| Lip Material | Nitrile Rubber (NBR) |
| Case Construction | Steel Case w/o Inner Case |
| Design | CRW1 |
| Seal Type | Oil |
| Operating Temperature [Min] | -40 °F |
| Weight | 1.346 LB |
| EAN or UPC | 85311040884 |
