Find a Service Center
- 0.98 in Shaft Diameter
- 1.5 in Housing Bore Diameter
- 0.24 in Overall Width
- Fluoro Rubber (FKM) Lip Material
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. The seals have an outer covering of steel or elastomer, designed to fit the housing bore. The sealing lip is made of elastomer or thermoplastic for best sealing against the rotating shaft. A garter spring in the seal optimizes the sealing against the shaft.
features
- Many variants
- Easy installation
| Pressure | 7 psi |
| Design | HMSA7 |
| Seal Application | Light Dirt Exclusion |
| Construction | HMSA7 |
| Housing Bore Dia. | 1.5 in, 38 mm |
| Lip Material | Fluoro Rubber (FKM) |
| Installation | Housing Press Fit |
| Material | Alloy Steel |
| Shaft Dia. | 0.98 in, 25 mm |
| Lip Type | Dual Lip |
| Temperature Range [Max] | 400 °F |
| Overall Width | 0.24 in, 6 mm |
| Cover/Compensation Ring/Plate Required | No |
| Seal Design | Molded Design |
| Lip Style | Internal |
| Inch/Metric | Inch |
| Speed | 0.05 ft/min |
| Temperature Range [Min] | -40 °F |
| Case Construction | Rubber Covered Steel Case |
| Spring Material | Carbon Steel Garter |
| Lubricant | Oil or Grease |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Operating Temperature [Max] | 390 °F |
| Case Design | Rubber Outside Diameter |
| Operating Temperature [Min] | -5 °F |
| Size Range [Max] | 3/4 in |
| Finish | Full Polish Chrome |
| No. of Pieces | 8 |
| No. of Points | 12 |
| Set Includes | 5/16 in, 3/8 in, 7/16 in, 1/2 in, 9/16 in, 5/8 in, 11/16 in, 3/4 in |
| Size Range [Min] | 5/16 in |
| No. of Teeth | 72 |
| Weight | 0.07 LB |
| EAN or UPC | 85311993869 |
