Find a Service Center
- 1 in Shaft Diameter
- 1.496 in Housing Bore
- 0.39 in Overall Width
- Nitrile Rubber (NBR) Lip Material
- SKF Wave Seal
description
- Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
features
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
| Temperature Range [Min] | -65 °F |
| Temperature Range [Max] | 225 °F |
| Lip Material | Nitrile Rubber (NBR) |
| Seal Design | SKF Wave |
| Misalignment & Runout (In. @ Feet Per Minute) | 0.015@1000, 0.010@3600 |
| Inch/Metric | Inch |
| Lip Style | Internal |
| Installation | Housing Press Fit |
| Design | CRW1 |
| Speed | 0.07 ft/min |
| Housing Bore Dia. | 1.496 in |
| Operating Temperature [Max] | 210 °F |
| Pressure | 10 psi |
| Material | Alloy Steel |
| Case Material | Steel |
| Spring Type | Garter |
| Spring Material | Carbon Steel |
| Seal Application | General Purpose |
| Case Construction | Steel Case w/o Inner Case |
| Lip Type | Single Lip |
| Case Design | Metal Case |
| Bore Sealant | Bore Tite |
| Shaft Dia. | 1 in |
| Operating Temperature [Min] | -40 °F |
| Seal Type | Oil |
| Lubricant | Oil or Grease |
| Cover/Compensation Ring/Plate Required | No |
| Overall Width | 0.39 in |
| Construction | CRW1 |
| Solid | Yes |
| No. of Pieces | 5 |
| Size Range [Min] | 10 mm |
| No. of Points | 12 |
| Finish | Full Polish Chrome |
| Weight | 0.075 LB |
| EAN or UPC | 85311008099 |
