Find a Service Center
- Grease
description
- A mineral oil based grease, using a lithium-calcium soap. Its high content of molybdenum disulphide and graphite, in conjunction with an extremely high viscosity oil, provide outstanding protection under the harshest conditions involving high loads, slow rotations and severe vibrations.
features
- Extremely suitable for lubricating large sized spherical roller bearings subject to high loads and slow rotations, a situation where microslip is likely to occur
- Extremely mechnically stable providing good water resistance and corrosion protection
| Low Temperature Torque | 150/100 @ 14 °F |
| Penetration (DIN ISO 2137 Prolonged) [Max] | +50 |
| Color | Black |
| Available For Single Point Lubrication | No |
| NLGI No. | 2 |
| EP Performance - 4 Ball - Wear Scar [Max] | 1.2 mm (DIN 51350/5, 1400N) |
| Rolling Bearing Grease Life [Max] | 1000 at 212 °F |
| Corrosion Protection - Distilled Water | 0-0 (EMCOR, ISO 11007) |
| Mechanical Stability, V2F Test, 144 hrs | M |
| Operating Temperature [Max] | 248 °F |
| Base Oil Viscosity DIN 51562 at 104 °F | 1020 mm²/s |
| Corrosion Protection - 0.5% NaCl | 2-2 (EMCOR, ISO 11007) |
| Base Oil | Mineral |
| Dropping Point [Min] | 356 °F |
| Water Resistance [Max] | 1 |
| Base Oil Viscosity DIN 51562 at 212 °F | 47 mm²/s |
| Oil Separation (DIN 51817, 104 °F) | 1-5 |
| Copper Corrosion [Max] | 1 Maximum |
| NLGI Grade | 2 |
| Penetration (DIN ISO 2137 Worked 60 Strokes) | 265 - 295 |
| Shelf Life | 5 Years |
| Mechanical Stability - Roll Stability, ASTM D1831 [Max] | +50 |
| EP Performance - 4 Ball - Weld Load [Min] | 3000 N |
| Operating Temperature [Min] | 14 °F |
| Corrosion Protection - Water Washout | 0-0 (EMCOR, ISO 11007) |
| Thickener | Lithium, Calcium |
| Lubrication Ability | Pass at 212 °F |
| Weight | 1.02 LB |
| EAN or UPC | 7316571591988 |
