Skip to content Skip to navigation menu


Oil Analysis Tool

Item #101170492
    Shipment Options

Product details

  • Oil Analysis Tool


  • The SKF TMEH 1 is a portable instrument that displays immediate information on the machinery oil condition. By comparing the measurements obtained from used and unused oils of the same type and brand, the oil check monitor is able to determine the degree of change in the condition of the oil, allowing the user to achieve optimised intervals between oil changes and detect increased mechanical wear and loss of the oil’s lubricating properties.


  • Bearings


  • Shows changes in oil condition affected by water, fuel, metal and/or oxidation
  • Numerical read-out to facilitate trending
  • Can store calibration (good oil) to memory
  • Hand held and user friendly


  • When dismounting, the locking pins will still firmly engage the shaft thread even after the grub screws have been loosened. Light blows with a rubber hammer to the nut in the vicinity of the grub screws will loosen the pins. The nuts can then easily be


Suitable Oil Types Mineral, Synthetics
Read-Out Green/ Red Grading| Numerical Value 0 -100
Dimensions 9.8 in x 3.7 in x 1.3 in
Weight 1.237 LB
EAN or UPC 7316570356663
Close Compare List Open Compare List Toggle

Product Comparison