Find a Service Center
Alternate Products
- 0.375 in Inner Diameter
- 0.875 in Outer Diameter
- Single Row
- 0.281 in Overall Width
- 2 Seals
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
features
- Carry radial and axial loads in either direction or combined loads, saving space and cost
- Help electric motor applications run quieter
- Versatile and provide an easy interchange for operational efficiency
- Well balanced, all purpose bearing with deep races and uninterrupted shoulders for higher load capability
| Snap Ring | No Snap Ring |
| Contact Angle | 0° |
| Inch/Metric | Inch Bore |
| Capacity | Standard Capacity |
| Bearing Material | Steel |
| Rolling Element Material | Steel |
| Enclosure | Double Sealed |
| Bore Type | Round Bore |
| Dynamic Load Rating | 830.00 lbf |
| No. in Set | Single Bearing |
| Closure Type | 2 Seals |
| Fillet Radius Cone | 0.016 in, 0.41 mm |
| Cage Type | Metal |
| Outer Ring Width | 9/32 in |
| icNumber | 7696119 |
| Internal Clearance | C3 |
| Temperature Range [Max] | 275 °F |
| Relubricatable | No |
| Rolling Element | Ball |
| Width | 9/32 in |
| Precision | Standard |
| I.D. | 3/8 in |
| Overall Width | 0.281 in, 7 mm |
| O.D. | 7/8 in |
| Inner Ring Width | 9/32 in |
| Lubricant | Polyurea Base |
| Seal Material | Buna-N |
| Rows of Balls | Single |
| Temperature Range [Min] | -30 °F |
| O.D. Type | Straight |
| Cage Material | Steel |
| No. of Rows | 1 |
| Fillet Radius | 0.016 in |
| Origin | Single Row Radial |
| Bearing Type | Radial |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Closed Width | 9/32 in |
| Ball Material | Steel |
| Precision Level | Standard (ABEC 1) |
| Material | Steel |
| Precision Class | ISO P0 |
| Radial Internal Clearance | C3 |
| Locking Device | No Locking Device |
| Open Width | 7/32 in |
| Preload Level | None |
| Static Load Rating [Max] | 312.00 lbf |
| Seal Type | Contact Seals |
| Weight | 0.044 LB |
| EAN or UPC | 87796044272 |
| NSN Number | 3110-00-520-3877 |
