Find a Service Center
- 0.591 in Inner Diameter
- 1.378 in Outer Diameter
- Single Row
- 0.656 in Overall Width
- 2 Seals
description
- The felt seal type ball bearing permits certain design economies, but cannot be assumed to be suitable for all conditions of service.In many cases it is supplemented by other parts for really adequate bearing protection in small equipment such as fractional horsepower motors, electric vacuum cleaners, small gear units, electric and pheumatic tools, etc. Felt seal bearings are recommended for effective grease retention and exclusion of foreign matter. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
features
- Versatile and provide an easy interchange for operational efficiency
- Well balanced, all purpose bearing with deep races and uninterrupted shoulders for higher load capability
- Carry radial and axial loads in either direction or combined loads, saving space and cost
- Help electric motor applications run quieter
| Static Load Rating [Max] | 830 lbf |
| Radial Internal Clearance | C3 |
| Locking Device | No Locking Device |
| Inch/Metric | Metric Bore |
| Origin | Single Row Radial |
| Snap Ring | No Snap Ring |
| Precision Class | ISO P0 |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Material | Steel |
| Preload Level | None |
| Seal Type | Light Contact Seals |
| Capacity | Standard Capacity |
| I.D. | 15 mm |
| Relubricatable | No |
| Rows of Balls | Single |
| Cage Type | Metal |
| Outer Ring Width | 0.656 in |
| Inner Ring Width | 0.656 in |
| Enclosure | Double Sealed |
| Internal Clearance | C0 |
| Temperature Range [Max] | 275 °F |
| Rolling Element Material | Steel |
| Temperature Range [Min] | -30 °F |
| Fillet Radius Cone | 0.024 in, 0.61 mm |
| O.D. Type | Straight |
| Fillet Radius | 0.024 in |
| Contact Angle | 0° |
| No. in Set | Single Bearing |
| Bearing Type | Radial |
| Seal Material | Felt |
| Precision Level | Standard (ABEC 1) |
| Bore Type | Round Bore |
| No. of Rows | 1 |
| Closure Type | 2 Seals |
| Bearing Material | Steel |
| Precision | Standard |
| Rolling Element | Ball |
| Lubricant | Polyurea Base |
| O.D. | 35 mm |
| icNumber | 7700526 |
| Dynamic Load Rating | 1930 lbf |
| Ball Material | Steel |
| Cage Material | Steel |
| Overall Width | 0.656 in, 17 mm |
| Weight | 0.309 LB |
| EAN or UPC | 87796045170 |
