Find a Service Center
- Single Row Radial Bearing, 45 mm ID x 85 mm OD x 27 mm Wide, Double Sealed (Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- The 200 series R-Seal type consists of deep groove, Conrad type bearings which incorporate a flare-out, contact R Seal.In this design a synthetic rubber impregnated washer is enclosed between two metal shields to give unsurpassed protection against contaminiants. Because of the heavy contact seal, this series is normally employed in moderate speed service.
| Static Load Rating [Max] | 4550 lbf |
| Cage Type | Metal |
| Temperature Range [Max] | 275 °F |
| O.D. Type | Straight |
| Origin | Wide Inner Ring |
| Capacity | Standard Capacity |
| Cage Material | Steel |
| Inch/Metric | Metric Bore |
| Snap Ring | No Snap Ring |
| Bore Type | Round Bore |
| Radial Internal Clearance | C3 |
| Inner Ring O.D. | 2.279 in |
| Inner Ring Width | 27 mm |
| Ball Material | Steel |
| Outer Ring Width | 21 mm |
| Temperature Range [Min] | -30 °F |
| Seal O.D. | 2.851 mm |
| Rows of Balls | Single |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Locking Device | No Locking Device |
| No. in Set | Single Bearing |
| Dynamic Load Rating | 8300 lbf |
| Enclosure | Double Sealed |
| O.D. | 85 mm |
| Fillet Radius | 0.039 in |
| I.D. | 45 mm |
| Seal Type | Contact Seals |
| Precision | Standard |
| Preload Level | None |
| Material | Steel |
| Bearing Type | Radial |
| Contact Angle | 0° |
| Lubricant | Polyurea Base |
| icNumber | 7701308 |
| Seal Material | Rubber |
| Precision Level | Standard (ABEC 1) |
| Seal Protection Width | 0.952 in |
| Weight | 1.036 LB |
| EAN or UPC | 87796041530 |
