Find a Service Center
Alternate Products
- Single Row Radial Bearing, 0.125" ID x 0.375" OD x 0.156" Wide, Double Shielded (Non-Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Lubricant | Polyurea Base |
| No. in Set | Single Bearing |
| Radial Internal Clearance | C3 |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Enclosure | Double Shielded |
| Precision | Standard |
| Seal Type | Non-Contact Seals |
| Origin | Single Row Radial |
| Outer Ring Width | 5/32 in |
| Material | Steel |
| Temperature Range [Min] | -30 °F |
| O.D. Type | Straight |
| Precision Level | Standard (ABEC 1) |
| Cage Type | Metal |
| Dynamic Load Rating | 160.00 lbf |
| Static Load Rating [Max] | 48.00 lbf |
| Preload Level | None |
| Locking Device | No Locking Device |
| I.D. | 1/8 in |
| Bearing Type | Radial |
| Closed Width | 5/32 in |
| Bore Type | Round Bore |
| icNumber | 7696488 |
| O.D. | 3/8 in |
| Rows of Balls | Single |
| Inner Ring Width | 5/32 in |
| Seal Material | Metal |
| Contact Angle | 0° |
| Temperature Range [Max] | 275 °F |
| Open Width | 5/32 in |
| Fillet Radius | 0.012 in |
| Width | 5/32 in |
| Cage Material | Steel |
| Capacity | Standard Capacity |
| Snap Ring | No Snap Ring |
| Ball Material | Steel |
| Inch/Metric | Inch Bore |
| Weight | 0.01 LB |
| EAN or UPC | 87796044418 |
| NSN Number | 3110-00-155-9589, 3110-00-277-0019 |
