Find a Service Center
Alternate Products
- Single Row Radial Bearing, 0.1875" ID x 0.5" OD x 0.196" Wide, Double Shielded (Non-Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| O.D. Type | Straight |
| Seal Material | Metal |
| Cage Material | Steel |
| No. in Set | Single Bearing |
| Contact Angle | 0° |
| Bore Type | Round Bore |
| Rows of Balls | Single |
| Precision Level | Standard (ABEC 1) |
| Snap Ring | No Snap Ring |
| Fillet Radius | 0.012 in |
| Closed Width | 0.196 in |
| icNumber | 7696102 |
| Inch/Metric | Inch Bore |
| Dynamic Load Rating | 325.00 lbf |
| Open Width | 5/32 in |
| Temperature Range [Min] | -30 °F |
| Static Load Rating [Max] | 110.00 lbf |
| Material | Steel |
| Enclosure | Double Shielded |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Precision | Standard |
| Outer Ring Width | 0.196 in |
| Lubricant | Polyurea Base |
| I.D. | 3/16 in |
| Temperature Range [Max] | 275 °F |
| Ball Material | Steel |
| Bearing Type | Radial |
| Cage Type | Metal |
| Locking Device | No Locking Device |
| Radial Internal Clearance | C3 |
| Origin | Single Row Radial |
| Seal Type | Non-Contact Seals |
| O.D. | 1/2 in |
| Width | 0.196 in |
| Capacity | Standard Capacity |
| Inner Ring Width | 0.196 in |
| Preload Level | None |
| Weight | 0.022 LB |
| EAN or UPC | 87796044463 |
| NSN Number | 3110-00-208-0055, 3110-00-227-3038, 3110-00-728-0963 |
