Find a Service Center
Alternate Products
- 4.724 in Inner Diameter
- 8.465 in Outer Diameter
- Single Row
- 1.575 in Overall Width
- Cylindrical OD
description
- The angular contact light 7200WN series is dimensionally interchangeable with the radial 200 series.The features of the 7000WN series include a refined bore diameter. A single bearing is recommended for applications in which the thrust load is in one direction or, in the case of combined loads, the thrust load is high in relation to the radial load. A duplex pair is recommended for application where thrust ispresent in both directions or where axialdisplacement of the shaft must be restricted.For exceptionally high thrust loads in one direction, a tandem pair can be utilized opposed by a third bearing. Sizes 7201K through 7203WN have a 20° contact angle and a nylon cage. Sizes 7204WN through 7218WN have a 40° contact angle and a one-piece, ball piloted, pressed brass cage.Larger sizes 7219WN through 7230WN have a 40° contact angle and a one-piece, outer ring piloted high-strength machined bronze cage.
features
- One-piece, ball-piloted, pressed brass cage
- Maximum capacity angular contact ball bearing
- Enhanced raceway finish for quiet running
- Refined bore diameter tolerance for longer bearing life
- High-speed capabilities
- Dimensionally interchangeable with 200 series deep groove ball bearings
- 40 degree contact angle for heavy thrust load capacity
| Capacity | Standard Capacity |
| Lubricant | Oil Preservative |
| Bearing Type | Angular Contact |
| O.D. | 215 mm |
| Bore Type | Round Bore |
| Static Load Rating [Max] | 36500 lbf |
| Universally (Flush) Ground | Yes |
| Rolling Element | Ball |
| Seal Material | None |
| Cage Type | Metal |
| Fillet Radius Cone | 0.083 in, 2.11 mm |
| Rows of Balls | Single |
| Ball Material | Steel |
| Preload Level | None |
| Bearing Material | Steel |
| Dynamic Load Rating | 42500 lbf |
| Outer Ring Width | 40 mm |
| Overall Width | 1.575 in, 40 mm |
| Filling Slot | No |
| Closure Type | Open |
| Radial Internal Clearance | C3 |
| Inch/Metric | Metric Bore |
| Snap Ring | No Snap Ring |
| Seal Type | Unsealed |
| Precision | Standard |
| Rolling Element Material | Steel |
| No. of Rows | 1 |
| No. in Set | Single Bearing |
| Relubricatable | No |
| Enclosure | Open |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| O.D. Type | Straight |
| I.D. | 120 mm |
| Inner Ring Width | 40 mm |
| Material | Steel |
| Locking Device | No Locking Device |
| Contact Angle | 40° |
| Cage Material | Brass/Bronze |
| icNumber | 7695862 |
| Precision Level | Standard (ABEC 1) |
| Internal Design | Universal Mounting |
| Precision Class | ISO P0 |
| Fillet Radius | 0.079 in |
| Origin | Single Row Angular Contact |
| Weight | 12.818 LB |
| EAN or UPC | 87796068513 |
