- 2.953 in Inner Diameter
- 7.48 in Outer Diameter
- Single Row
- 1.772 in Overall Width
- Cylindrical OD
description
- The angular contact Heavy 7400 series is dimensionally interchangeable with the radial 400 series.Those sizes with a "WN" suffix include a refined bore diameter tolerance. The 7400 series can sustain heavier thrust and combined loads than the 7300WN series. A single bearing is recommended for applications in which the thrust load is in one direciton or, in the case of combined loads, the thrust load is high in relation to the radial load.A duplex pair is recommended for application where thrust is present in both dirctions or where axial displacement of the shaft must be restricted.For exceptionally high thrust loads in one direction, a tandem pair can be utilized opposed by a third bearing. Those sizes with a suffix "W" have a 20° contact angle and a steel retainer.Those sizes with a suffix "PW" have a 35° contact angle and a a steel retainer.Those sizes with a "WN" suffix have a 40° contact angle and a one-piece, high-strength macined bronzed cage.
features
- 40 degree contact angle for heavy thrust load capacity
- One-piece, ball-piloted, pressed brass cage
- Maximum capacity angular contact ball bearing
- Enhanced raceway finish for quiet running
- Refined bore diameter tolerance for longer bearing life
- High-speed capabilities
- Dimensionally interchangeable with 200 series deep groove ball bearings
| Bore Type | Round Bore |
| No. of Rows | 1 |
| Outer Ring Width | 45 mm |
| Capacity | Standard Capacity |
| Relubricatable | No |
| Precision Level | Standard (ABEC 1) |
| Enclosure | Open |
| Inch/Metric | Metric Bore |
| Radial Internal Clearance | C3 |
| Lubricant | Oil Preservative |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Precision | Standard |
| icNumber | 7695888 |
| Overall Width | 1.772 in, 45 mm |
| Static Load Rating [Max] | 33500 lbf |
| Rows of Balls | Single |
| Bearing Type | Angular Contact |
| Universally (Flush) Ground | Yes |
| Filling Slot | No |
| Material | Steel |
| Preload Level | None |
| Seal Type | Unsealed |
| Rolling Element Material | Steel |
| Internal Design | Universal Mounting |
| Fillet Radius Cone | 0.118 in, 3 mm |
| Bearing Material | Steel |
| O.D. Type | Straight |
| I.D. | 75 mm |
| Origin | Single Row Angular Contact |
| Contact Angle | 40° |
| Cage Material | Brass/Bronze |
| No. in Set | Single Bearing |
| Fillet Radius | 0.1 in |
| Cage Type | Metal |
| Rolling Element | Ball |
| Precision Class | ISO P0 |
| Seal Material | None |
| Snap Ring | No Snap Ring |
| O.D. | 190 mm |
| Ball Material | Steel |
| Locking Device | No Locking Device |
| Inner Ring Width | 45 mm |
| Dynamic Load Rating | 45500 lbf |
| Closure Type | Open |
| Weight | 15.05 LB |
| EAN or UPC | 87796068995 |

