- 0.875 in Inside Diameter
- 2.047 in Outside Diameter
- Setscrew Locking
- 2 Shields Closure
- Imperial
description
- Timken has introduced one of the easiest-to-install housed units available. It features a conventional setscrew, but provides shaft protection and prolongs the life of the shaft - no nicks, raised metal or permanent shaft damage. You'll find Timken's patented shaft guarding technology where production uptime is critical and shaft replacement is expensive. Where traditional setscrew products rely on the setscrews to dig into the shaft to maintain grip, Timken's shaft guarding technology transfers the pressure of the setscrews through a stainless steel, hardened band. This absorbs the problems encountered from relative motion typically associated with setscrew product. The stainless band will not corrode the shaft. Shaft guarding technology exceeds gripping application requirements, maintains dimensional integrity and reduces fretting corrosion. It locks to the shaft like a traditional setscrew, but with new benefits.
applications
- Rubber and plastic
- Forest products (paper, tissue, newsprint, fine paper)
- Industrial machinery (fans and blowers, canning and bottling, conveyors, food, printing presses, packaging, textiles)
- Agriculture (combines, implements)
- Timken offers a complete line of application-specific, custom-formulated lubricants that help bearings and components operate efficiently in industrial environments. High-temperature, anti-wear, and water-resistant additives offer superior protection in t
features
- Black Oxide Coated
| Static Load Rating [Max] | 1760 lbf |
| Locking Type | Setscrew Locking |
| O.D. | 2.04724 in |
| Bearing Type | Radial |
| Bearing Material | Steel |
| Dynamic Load Rating | 3490 lbf |
| Internal Clearance | C3 |
| Inner Ring O.D. | 1 21/64 in |
| Rolling Element | Ball |
| I.D. | 7/8 in |
| Width | 1 3/8 in |
| Outer Ring Size | 205 |
| Outer Ring Width | 3/4 in |
| Closure Type | 2 Shields |
| Ball Material | Steel |
| Locking Device | Setscrew Locking Collar |
| Seal Type | Non-Contact Seals |
| Preload Level | None |
| No. of Rows | 1 |
| O.D. Type | Straight w/ Snap Ring |
| Radial Internal Clearance | C3 |
| Overall Width | 1.374 in, 34.9 mm |
| Enclosure | Double Shielded |
| Snap Ring Thickness | 0.046875 in |
| Precision | Standard |
| Set Screw Size | 1/4-28 |
| Contact Angle | 0° |
| Capacity | Standard Capacity |
| Cage Material | Steel |
| Material | Steel |
| Precision Level | Standard (ABEC 1) |
| Snap Ring O.D. | 2 17/64 in |
| Snap Ring | With Snap Ring |
| No. in Set | Single Bearing |
| Relubrication Feature | Lube Hole |
| Rows of Balls | Single |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Seal Material | Metal |
| Bore Type | Round Bore |
| Inch/Metric | Inch Bore |
| Relubricatable | Yes |
| Lubricant | Polyurea Base |
| Cage Type | Metal |
| Inner Ring Width | 1 11/32 in |
| Set Screw Offset | 17/64 in |
| Weight | 0.581 LB |
| EAN or UPC | 87796299290 |

