Find a Service Center
Alternate Products
- 2.4375" Shaft, 4.125" Base to Center, Labyrinth Seals, Eccentric Collar, Non-Expansion Type
description
- Fafnir RSAO and LSAO type pillow blocks are equipped with GN-KRRB wide inner ring ball bearings, and the LSA series is equipped with GN-KLLB wide inner ring bearings. They are ideally suited for installations where the load is heavy inproportion to the shaft diameter or where considerable shock loads exist. These pillow blocks are prelubricated and ready for immediate use. For wet or extremely dirty conditions, a grease fitting is provided for relubrication if required. All units are supplied with a self-locking collar.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Inch/Metric | Inch Bore |
| Pillow Block Type | Thru-Bolt |
| Housing Material | Cast Iron |
| Collar No. | SN207K |
| Bolt Size | 3/4 in |
| Base Length | 13 3/4 in |
| Series | LSAO Series |
| Base Width | 4 in |
| Bolt Hole Length | 7/8 in |
| Housing Height | 7 1/32 in |
| Lubrication | Relubricatable |
| Mounted Unit Duty | Heavy-Duty |
| Insert Type | Steel Insert |
| Collar O.D. | 3 1/2 in |
| Bearing Type | Ball Bearing |
| Seal Type | Labyrinth Seals |
| Temperature Range [Max] | 350 °F |
| End Type | Open End |
| Housing Construction | 1 Piece |
| Length Through Bore | 3.125 in |
| Bolt Holes | 2 |
| Bearing Insert | GN207KRRB |
| Overall Width | 4 in |
| Base Height | 1 1/2 in |
| Bolt Hole Width | 1 3/8 in |
| Bolt Hole Spacing | 11 1/4 in |
| Housing Width | 6 7/16 in |
| Bearing Design | Non-Expansion |
| Shaft Dia. | 2.4375 in |
| Locking Device | Eccentric Locking Collar |
| Weight | 28.508 LB |
| EAN or UPC | 87796061569 |
