Find a Service Center
Alternate Products
- 2.4375" Shaft, 4.125" Base to Center, Cast Iron Housing, 2-Bolt Pillow Block, Contact Seals, Eccentric Collar
description
- Fafnir RSAO and LSAO type pillow blocks are equipped with GN-KRRB wide inner ring ball bearings, and the LSA series is equipped with GN-KLLB wide inner ring bearings. They are ideally suited for installations where the load is heavy inproportion to the shaft diameter or where considerable shock loads exist. These pillow blocks are prelubricated and ready for immediate use. For wet or extremely dirty conditions, a grease fitting is provided for relubrication if required. All units are supplied with a self-locking collar.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Base Height | 1 1/2 in |
| Shaft Dia. | 2.4375 in |
| Lubrication | Relubricatable |
| Bearing Design | Non-Expansion |
| Bearing Insert | GN207KRRB |
| Bearing Type | Ball Bearing |
| Base Width | 4 in |
| Base Length | 13 3/4 in |
| Bolt Hole Width | 7/8 in |
| Mounted Unit Duty | Heavy-Duty |
| Housing Construction | 1 Piece |
| Housing Material | Cast Iron |
| Inch/Metric | Inch Bore |
| End Type | Open End |
| Seal Type | Contact Seals |
| Locking Device | Eccentric Locking Collar |
| Bolt Hole Spacing | 11 1/4 in |
| Insert Type | Steel Insert |
| Bolt Holes | 2 |
| Bolt Hole Length | 1 3/8 in |
| Pillow Block Type | Thru-Bolt |
| Collar No. | SN207K |
| Weight | 28.25 LB |
| EAN or UPC | 87796061682 |
