Find a Service Center
- 1.4375" Shaft, 1.8125" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with all applicable federal food processing requirements without compromising bearing performance needs. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F).The finish will not scrape or flake off during use.
applications
- Food and beverage
- Material handling
- Dairy and refrigeration
- HVAC
- Chemical industry
- Maritime industry
- Highly corrosive environments
compliances
- 0
| Pillow Block Type | Thru-Bolt |
| Base Width | 1 25/32 in |
| Dynamic Load Rating | 6400 lbf |
| Housing Material | Polymer |
| Shaft Dia. | 1.4375 in |
| Base Height | 21/32 in |
| Length Through Bore | 1.48438 in |
| Base Length | 6 9/16 in |
| Collar O.D. | 2 1/8 in |
| Housing Height | 3 5/8 in |
| Locking Device | Eccentric Locking Collar |
| Lubrication | Relubricatable |
| Seal Type | Contact Seals |
| Mounted Unit Duty | Normal-Duty, Corrosion Resistant-Duty |
| Temperature Range [Max] | 250 °F |
| Bolt Hole Length | 31/32 in |
| Outer Ring Size | 207 |
| Bearing Type | Ball Bearing |
| Series | RAK Series |
| Overall Width | 2 11/64 in |
| Bolt Hole Spacing | 5 1/8 in |
| Static Load Rating [Max] | 3400 lbf |
| End Type | Open End |
| Bolt Holes | 2 |
| Housing Construction | 1 Piece |
| Inch/Metric | Inch Bore |
| Bolt Hole Width | 9/16 in |
| Bearing Insert | G1107KRRB TDCF |
| Collar No. | S1107K |
| Bearing Design | Non-Expansion |
| Bolt | 1/2 in |
| Weight | 1.872 LB |
| EAN or UPC | 87796180109 |
-
![HACCP Friendly]()
HACCP Friendly
