Find a Service Center
- 1" Shaft, 1.3125" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with all applicable federal food processing requirements without compromising bearing performance needs. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F).The finish will not scrape or flake off during use.
applications
- Food and beverage
- Material handling
- Dairy and refrigeration
- HVAC
- Chemical industry
- Maritime industry
- Highly corrosive environments
compliances
- 0
| Bolt Hole Length | 13/16 in |
| Bearing Design | Non-Expansion |
| Housing Material | Polymer |
| End Type | Open End |
| Shaft Dia. | 1 in |
| Base Length | 5 1/2 in |
| Bolt | 3/8 in |
| Bolt Hole Spacing | 4 1/8 in |
| Housing Construction | 1 Piece |
| Collar No. | S1100K |
| Length Through Bore | 1.375 in |
| Locking Device | Eccentric Locking Collar |
| Series | RAK Series |
| Outer Ring Size | 205 |
| Base Height | 15/32 in |
| Collar O.D. | 1 1/2 in |
| Bolt Hole Width | 7/16 in |
| Base Width | 1 13/32 in |
| Bearing Type | Ball Bearing |
| Inch/Metric | Inch Bore |
| Static Load Rating [Max] | 1730 lbf |
| Bearing Insert | G1100KRRB TDCF |
| Seal Type | Contact Seals |
| Lubrication | Relubricatable |
| Bolt Holes | 2 |
| Dynamic Load Rating | 3550 lbf |
| Pillow Block Type | Thru-Bolt |
| Mounted Unit Duty | Normal-Duty, Corrosion Resistant-Duty |
| Temperature Range [Max] | 250 °F |
| Housing Height | 2 11/16 in |
| Overall Width | 1 49/64 in |
| Weight | 0.906 LB |
| EAN or UPC | 87796180055 |
-
![HACCP Friendly]()
HACCP Friendly
