Find a Service Center
- 1" Shaft, 1.4375" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with all applicable federal food processing requirements without compromising bearing performance needs. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F).The finish will not scrape or flake off during use.
applications
- Food and beverage
- Material handling
- Dairy and refrigeration
- HVAC
- Chemical industry
- Maritime industry
- Highly corrosive environments
compliances
- 0
| Pillow Block Type | Thru-Bolt |
| Collar O.D. | 1 1/2 in |
| Housing Construction | 1 Piece |
| Base Height | 19/32 in |
| Series | RAS Series |
| Collar No. | S1100K |
| Locking Device | Eccentric Locking Collar |
| Shaft Dia. | 1 in |
| Lubrication | Relubricatable |
| Bolt Holes | 2 |
| End Type | Open End |
| Bolt Hole Length | 13/16 in |
| Temperature Range [Max] | 250 °F |
| Length Through Bore | 1.375 in |
| Seal Type | Contact Seals |
| Bearing Insert | G1100KRRB TDCF |
| Base Width | 1 13/32 in |
| Base Length | 5 1/2 in |
| Housing Height | 2 13/16 in |
| Inch/Metric | Inch Bore |
| Housing Material | Polymer |
| Overall Width | 1 49/64 in |
| Bearing Design | Non-Expansion |
| Bearing Type | Ball Bearing |
| Mounted Unit Duty | Normal-Duty, Corrosion Resistant-Duty |
| Bolt | 3/8 in |
| Bolt Hole Spacing | 4 1/8 in |
| Static Load Rating [Max] | 1730 lbf |
| Outer Ring Size | 205 |
| Dynamic Load Rating | 3550 lbf |
| Bolt Hole Width | 7/16 in |
| Weight | 0.962 LB |
| EAN or UPC | 87796180130 |
-
![HACCP Friendly]()
HACCP Friendly
