Find a Service Center
- 3.4375" Shaft, 5.125" Base to Center, Contact Seals, Eccentric Collar, Non-Expansion Type
description
- Fafnir RSAO and LSAO type pillow blocks are equipped with GN-KRRB wide inner ring ball bearings, and the LSA series is equipped with GN-KLLB wide inner ring bearings. They are ideally suited for installations where the load is heavy inproportion to the shaft diameter or where considerable shock loads exist. These pillow blocks are prelubricated and ready for immediate use. For wet or extremely dirty conditions, a grease fitting is provided for relubrication if required. All units are supplied with a self-locking collar.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Bolt Hole Width | 2 1/8 in |
| Shaft Dia. | 3.4375 in |
| Mounted Unit Duty | Heavy-Duty |
| Bearing Type | Ball Bearing |
| Bearing Design | Non-Expansion |
| Collar No. | SN307K |
| Bolt Hole Spacing | 13 3/8 in |
| Length Through Bore | 4.5625 in |
| Bolt Hole Length | 1 1/8 in |
| Locking Device | Eccentric Locking Collar |
| Insert Type | Steel Insert |
| Housing Height | 9 7/8 in |
| Base Height | 2 1/4 in |
| Seal Type | Contact Seals |
| Collar O.D. | 5 1/4 in |
| Pillow Block Type | Thru-Bolt |
| Bolt Holes | 2 |
| Overall Width | 4 3/4 in |
| Housing Width | 9 1/2 in |
| Inch/Metric | Inch Bore |
| End Type | Open End |
| Base Length | 16 1/8 in |
| Lubrication | Relubricatable |
| Bearing Insert | GN307KRRB |
| Housing Construction | 1 Piece |
| Base Width | 4 3/4 in |
| Series | RSAO Series |
| Bolt Size | 1 in |
| Housing Material | Cast Iron |
| Weight | 64.822 LB |
| EAN or UPC | 87796062030 |
