Find a Service Center
Alternate Products
- Single Row Radial Bearing, 1" ID x 2" OD x 0.5" Wide, Double Sealed (Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Closed Width | 1/2 in |
| Radial Internal Clearance | C3 |
| Contact Angle | 0° |
| Cage Type | Metal |
| Cage Material | Steel |
| Static Load Rating [Max] | 1,120.00 lbf |
| Dynamic Load Rating | 2,500.00 lbf |
| icNumber | 7697034 |
| Locking Device | No Locking Device |
| Width | 1/2 in |
| Precision | Standard |
| O.D. Type | Straight |
| Bearing Type | Radial |
| Seal Material | Buna-N |
| Bore Type | Round Bore |
| Temperature Range [Max] | 275 °F |
| Origin | Single Row Radial |
| Enclosure | Double Sealed |
| I.D. | 1 in |
| Inch/Metric | Inch Bore |
| Capacity | Standard Capacity |
| Preload Level | None |
| Open Width | 3/8 in |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Inner Ring Width | 1/2 in |
| Outer Ring Width | 1/2 in |
| Snap Ring | No Snap Ring |
| Lubricant | Polyurea Base |
| Temperature Range [Min] | -30 °F |
| O.D. | 2 in |
| Rows of Balls | Single |
| Ball Material | Steel |
| Fillet Radius | 0.031 in |
| Material | Steel |
| Seal Type | Contact Seals |
| Precision Level | Standard (ABEC 1) |
| No. in Set | Single Bearing |
| Weight | 0.198 LB |
| EAN or UPC | 87796044845 |
| NSN Number | 3110-00-259-0948 |
