Find a Service Center
Alternate Products
- 1 in Inner Diameter
- 2 in Outer Diameter
- Single Row
- 0.5 in Overall Width
- 2 Seals
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
features
- Versatile and provide an easy interchange for operational efficiency
- Well balanced, all purpose bearing with deep races and uninterrupted shoulders for higher load capability
- Carry radial and axial loads in either direction or combined loads, saving space and cost
- Help electric motor applications run quieter
| Material | Steel |
| Origin | Single Row Radial |
| Bearing Material | Steel |
| Temperature Range [Max] | 275 °F |
| Internal Clearance | C0 |
| icNumber | 7697034 |
| Locking Device | No Locking Device |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Fillet Radius Cone | 0.031 in, 0.79 mm |
| O.D. Type | Straight |
| Fillet Radius | 0.031 in |
| Closure Type | 2 Seals |
| Overall Width | 0.5 in, 13 mm |
| Cage Material | Steel |
| Open Width | 3/8 in |
| Static Load Rating [Max] | 1,120.00 lbf |
| Cage Type | Metal |
| Precision Class | ISO P0 |
| No. in Set | Single Bearing |
| Enclosure | Double Sealed |
| Precision Level | Standard (ABEC 1) |
| I.D. | 1 in |
| Preload Level | None |
| No. of Rows | 1 |
| Temperature Range [Min] | -30 °F |
| Dynamic Load Rating | 2,500.00 lbf |
| Rows of Balls | Single |
| Ball Material | Steel |
| Contact Angle | 0° |
| Snap Ring | No Snap Ring |
| Capacity | Standard Capacity |
| Precision | Standard |
| Seal Material | Buna-N |
| Inner Ring Width | 1/2 in |
| Bearing Type | Radial |
| Bore Type | Round Bore |
| Rolling Element | Ball |
| Inch/Metric | Inch Bore |
| O.D. | 2 in |
| Closed Width | 1/2 in |
| Rolling Element Material | Steel |
| Relubricatable | No |
| Lubricant | Polyurea Base |
| Radial Internal Clearance | C3 |
| Width | 1/2 in |
| Outer Ring Width | 1/2 in |
| Seal Type | Contact Seals |
| Weight | 0.198 LB |
| EAN or UPC | 87796044845 |
| NSN Number | 3110-00-259-0948 |
