Find a Service Center
Alternate Products
- Single Row Radial Bearing, 1.125" ID x 2.125" OD x 0.375" Wide, Open, Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small, 30 Metric series ball bearings can sustain radial, thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement. Some sizes in this series are available in stainless steel.When ordering, these are denoted by a prefix A before the bearing number. (e.g.: A38K)
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Locking Device | No Locking Device |
| Bearing Type | Radial |
| Cage Material | Steel |
| Seal Type | Unsealed |
| Material | Steel |
| Snap Ring | No Snap Ring |
| O.D. Type | Straight |
| Capacity | Standard Capacity |
| Dynamic Load Rating | 2650 lbf |
| Inch/Metric | Inch Bore |
| Enclosure | Open |
| Bore Type | Round Bore |
| Inner Ring Width | 3/8 in |
| Preload Level | None |
| Pre Lubricant | None |
| icNumber | 7697583 |
| Seal Material | None |
| Origin | Single Row Radial |
| O.D. | 2.125 in |
| Outer Ring Width | 3/8 in |
| Lubricant | Oil Preservative |
| No. in Set | Single Bearing |
| I.D. | 1 1/8 in |
| Width | 3/8 in |
| Rows of Balls | Single |
| Precision | Standard |
| Ball Material | Steel |
| Cage Type | Metal |
| Static Load Rating [Max] | 1220 lbf |
| Fillet Radius | 0.031 in |
| Radial Internal Clearance | C3 |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Precision Level | Standard (ABEC 1) |
| Contact Angle | 0° |
| Weight | 0.35 LB |
| EAN or UPC | 87796040465 |
| NSN Number | 3110-00-155-8899 |
