Find a Service Center
Alternate Products
- Single Row Radial Bearing, 0.25" ID x 0.75" OD x 0.28125" Wide, Double Shielded (Non-Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Snap Ring | No Snap Ring |
| Seal Type | Non-Contact Seals |
| Bearing Type | Radial |
| Lubricant | Polyurea Base |
| icNumber | 7696495 |
| Bore Type | Round Bore |
| Locking Device | No Locking Device |
| I.D. | 1/4 in |
| Precision Level | Standard (ABEC 1) |
| Enclosure | Double Shielded |
| Cage Type | Metal |
| Seal Material | Metal |
| O.D. | 3/4 in |
| Outer Ring Width | 9/32 in |
| Width | 9/32 in |
| Material | Steel |
| Ball Material | Steel |
| Dynamic Load Rating | 695.00 lbf |
| Temperature Range [Min] | -30 °F |
| No. in Set | Single Bearing |
| Inch/Metric | Inch Bore |
| O.D. Type | Straight |
| Capacity | Standard Capacity |
| Precision | Standard |
| Origin | Single Row Radial |
| Cage Material | Steel |
| Closed Width | 9/32 in |
| Fillet Radius | 0.016 in |
| Rows of Balls | Single |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Contact Angle | 0° |
| Preload Level | None |
| Temperature Range [Max] | 275 °F |
| Inner Ring Width | 9/32 in |
| Static Load Rating [Max] | 260.00 lbf |
| Open Width | 7/32 in |
| Radial Internal Clearance | C3 |
| Weight | 0.044 LB |
| EAN or UPC | 87796044142 |
