Find a Service Center
Alternate Products
- 0.25 in Inner Diameter
- 0.625 in Outer Diameter
- Single Row
- 0.196 in Overall Width
- 2 Seals
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
features
- Versatile and provide an easy interchange for operational efficiency
- Well balanced, all purpose bearing with deep races and uninterrupted shoulders for higher load capability
- Carry radial and axial loads in either direction or combined loads, saving space and cost
- Help electric motor applications run quieter
| Closed Width | 0.196 in |
| Rows of Balls | Single |
| Open Width | 0.196 in |
| icNumber | 7696114 |
| Temperature Range [Max] | 275 °F |
| Contact Angle | 0° |
| Snap Ring | No Snap Ring |
| Dynamic Load Rating | 365.00 lbf |
| Closure Type | 2 Seals |
| Precision Level | Standard (ABEC 1) |
| Cage Type | Metal |
| Capacity | Standard Capacity |
| Fillet Radius | 0.012 in |
| Ball Material | Steel |
| Lubricant | Polyurea Base |
| Preload Level | None |
| Temperature Range [Min] | -30 °F |
| Bore Type | Round Bore |
| Static Load Rating [Max] | 125.00 lbf |
| Outer Ring Width | 0.196 in |
| Inner Ring Width | 0.196 in |
| Origin | Single Row Radial |
| Seal Material | Buna-N |
| O.D. | 5/8 in |
| No. of Rows | 1 |
| Locking Device | No Locking Device |
| Width | 0.196 in |
| O.D. Type | Straight |
| Precision | Standard |
| Rolling Element | Ball |
| No. in Set | Single Bearing |
| Bearing Material | Steel |
| Cage Material | Steel |
| Material | Steel |
| Internal Clearance | C3 |
| Bearing Type | Radial |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Fillet Radius Cone | 0.016 in, 0.41 mm |
| Precision Class | ISO P0 |
| Rolling Element Material | Steel |
| Radial Internal Clearance | C3 |
| Relubricatable | No |
| Inch/Metric | Inch Bore |
| Seal Type | Contact Seals |
| I.D. | 1/4 in |
| Overall Width | 0.196 in, 5 mm |
| Enclosure | Double Sealed |
| Weight | 0.022 LB |
| EAN or UPC | 87796044173 |
