Find a Service Center
- 0.375 in Inner Diameter
- 0.875 in Outer Diameter
- Single Row
- 0.281 in Overall Width
- 1 Shield, Open
description
- Extra small, 30 Metric series ball bearings can sustain radial, thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement. Some sizes in this series are available in stainless steel.When ordering, these are denoted by a prefix A before the bearing number. (e.g.: A38K)
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
features
- Versatile and provide an easy interchange for operational efficiency
- Well balanced, all purpose bearing with deep races and uninterrupted shoulders for higher load capability
- Carry radial and axial loads in either direction or combined loads, saving space and cost
- Help electric motor applications run quieter
| Fillet Radius Cone | 0.016 in, 0.41 mm |
| Closure Type | 1 Shield, Open |
| Contact Angle | 0° |
| Rows of Balls | Single |
| Seal Type | Non-Contact Seals |
| icNumber | 7699231 |
| Dynamic Load Rating | 830 lbf |
| Lubricant | Oil Preservative |
| Radial Internal Clearance | C3 |
| Precision Class | ISO P0 |
| Precision Level | Standard (ABEC 1) |
| Relubricatable | No |
| Inch/Metric | Inch Bore |
| Material | Steel |
| Rolling Element Material | Steel |
| Cage Type | Metal |
| O.D. Type | Straight |
| Outer Ring Width | 9/32 in |
| Preload Level | None |
| Precision | Standard |
| Capacity | Standard Capacity |
| No. in Set | Single Bearing |
| Width | 9/32 in |
| Seal Material | Metal |
| Rolling Element | Ball |
| Static Load Rating [Max] | 312 lbf |
| Enclosure | Single Shield |
| Snap Ring | No Snap Ring |
| Origin | Single Row Radial |
| Overall Width | 0.281 in, 7 mm |
| Locking Device | No Locking Device |
| Internal Clearance | C3 |
| Cage Material | Steel |
| Ball Material | Steel |
| Bore Type | Round Bore |
| I.D. | 3/8 in |
| O.D. | 0.875 in |
| No. of Rows | 1 |
| Fillet Radius | 0.016 in |
| Bearing Material | Steel |
| Inner Ring Width | 9/32 in |
| Bearing Type | Radial |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Pre Lubricant | None |
| Weight | 0.17 LB |
| EAN or UPC | 87796044210 |
| NSN Number | 3110-00-155-8413 |
