Find a Service Center
Alternate Products
- Single Row Radial Bearing, 0.375" ID x 0.875" OD x 9/32" Wide, Double Shielded (Non-Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Lubricant | Polyurea Base |
| Open Width | 7/32 in |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Inch/Metric | Inch Bore |
| Fillet Radius | 0.016 in |
| Dynamic Load Rating | 830.00 lbf |
| Preload Level | None |
| Capacity | Standard Capacity |
| Temperature Range [Max] | 275 °F |
| Temperature Range [Min] | -30 °F |
| Outer Ring Width | 9/32 in |
| O.D. | 7/8 in |
| Radial Internal Clearance | C3 |
| Cage Material | Steel |
| Bearing Type | Radial |
| I.D. | 3/8 in |
| Origin | Single Row Radial |
| Bore Type | Round Bore |
| Cage Type | Metal |
| Width | 9/32 in |
| icNumber | 7695900 |
| Material | Steel |
| Precision | Standard |
| Locking Device | No Locking Device |
| Inner Ring Width | 9/32 in |
| Enclosure | Double Shielded |
| O.D. Type | Straight |
| Closed Width | 9/32 in |
| Ball Material | Steel |
| Snap Ring | No Snap Ring |
| Seal Material | Metal |
| Precision Level | Standard (ABEC 1) |
| Seal Type | Non-Contact Seals |
| Rows of Balls | Single |
| Contact Angle | 0° |
| Static Load Rating [Max] | 312.00 lbf |
| No. in Set | Single Bearing |
| Weight | 0.17 LB |
| EAN or UPC | 87796044227 |
| NSN Number | 3110-00-175-1120 |
