Find a Service Center
Alternate Products
- 0.5 in Inner Diameter
- 1.125 in Outer Diameter
- Single Row
- 0.312 in Overall Width
- 1 Shield, Open
description
- Extra small, 30 Metric series ball bearings can sustain radial, thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement. Some sizes in this series are available in stainless steel.When ordering, these are denoted by a prefix A before the bearing number. (e.g.: A38K)
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
features
- Versatile and provide an easy interchange for operational efficiency
- Well balanced, all purpose bearing with deep races and uninterrupted shoulders for higher load capability
- Carry radial and axial loads in either direction or combined loads, saving space and cost
- Help electric motor applications run quieter
| Precision Level | Standard (ABEC 1) |
| Seal Material | Metal |
| Cage Type | Metal |
| Fillet Radius | 0.016 in |
| O.D. Type | Straight |
| Relubricatable | No |
| Pre Lubricant | None |
| Origin | Single Row Radial |
| Bore Type | Round Bore |
| Preload Level | None |
| Fillet Radius Cone | 0.016 in, 0.41 mm |
| Ball Material | Steel |
| Enclosure | Single Shield |
| Width | 5/16 in |
| Rolling Element | Ball |
| Capacity | Standard Capacity |
| Locking Device | No Locking Device |
| Radial Internal Clearance | C3 |
| Overall Width | 0.312 in, 8 mm |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Lubricant | Oil Preservative |
| No. in Set | Single Bearing |
| Inch/Metric | Inch Bore |
| Outer Ring Width | 5/16 in |
| Rows of Balls | Single |
| Seal Type | Non-Contact Seals |
| icNumber | 7699228 |
| Rolling Element Material | Steel |
| Static Load Rating [Max] | 500 lbf |
| Contact Angle | 0° |
| Bearing Material | Steel |
| Bearing Type | Radial |
| Precision Class | ISO P0 |
| O.D. | 1.125 in |
| Material | Steel |
| Precision | Standard |
| No. of Rows | 1 |
| Snap Ring | No Snap Ring |
| Internal Clearance | C3 |
| Closure Type | 1 Shield, Open |
| Dynamic Load Rating | 1280 lbf |
| Inner Ring Width | 5/16 in |
| I.D. | 1/2 in |
| Cage Material | Steel |
| Weight | 0.19 LB |
| EAN or UPC | 87796044357 |
| NSN Number | 3110-00-554-6125 |
