Find a Service Center
Alternate Products
- 0.625 in Inner Diameter
- 1.375 in Outer Diameter
- Single Row
- 0.313 in Overall Width
- 1 Shield, Open
description
- Extra small, 30 Metric series ball bearings can sustain radial, thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement. Some sizes in this series are available in stainless steel.When ordering, these are denoted by a prefix A before the bearing number. (e.g.: A38K)
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
features
- Versatile and provide an easy interchange for operational efficiency
- Well balanced, all purpose bearing with deep races and uninterrupted shoulders for higher load capability
- Carry radial and axial loads in either direction or combined loads, saving space and cost
- Help electric motor applications run quieter
| Bore Type | Round Bore |
| Bearing Type | Radial |
| Cage Type | Metal |
| Seal Material | Metal |
| Closure Type | 1 Shield, Open |
| Precision Class | ISO P0 |
| O.D. | 1.375 in |
| Precision Level | Standard (ABEC 1) |
| Dynamic Load Rating | 1700 lbf |
| icNumber | 7699212 |
| Fillet Radius | 0.031 in |
| Fillet Radius Cone | 0.024 in, 0.61 mm |
| I.D. | 5/8 in |
| Preload Level | None |
| Radial Internal Clearance | C3 |
| Static Load Rating [Max] | 682 lbf |
| Pre Lubricant | None |
| Bearing Material | Steel |
| Origin | Single Row Radial |
| Precision | Standard |
| Rolling Element Material | Steel |
| No. in Set | Single Bearing |
| Seal Type | Non-Contact Seals |
| Inner Ring Width | 11/32 in |
| Locking Device | No Locking Device |
| Cage Material | Steel |
| Width | 11/32 in |
| Material | Steel |
| Outer Ring Width | 11/32 in |
| Lubricant | Oil Preservative |
| Inch/Metric | Inch Bore |
| Capacity | Standard Capacity |
| No. of Rows | 1 |
| Enclosure | Single Shield |
| O.D. Type | Straight |
| Internal Clearance | C0 |
| Ball Material | Steel |
| Rolling Element | Ball |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Contact Angle | 0° |
| Rows of Balls | Single |
| Relubricatable | No |
| Snap Ring | No Snap Ring |
| Overall Width | 0.313 in, 8 mm |
| Weight | 0.22 LB |
| EAN or UPC | 87796044722 |
| NSN Number | 3110-00-554-5237 |
