Find a Service Center
Alternate Products
- 0.625 in Inner Diameter
- 1.375 in Outer Diameter
- Single Row
- 0.344 in Overall Width
- 2 Shields
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
features
- Versatile and provide an easy interchange for operational efficiency
- Well balanced, all purpose bearing with deep races and uninterrupted shoulders for higher load capability
- Help electric motor applications run quieter
- Carry radial and axial loads in either direction or combined loads, saving space and cost
| Material | Steel |
| Inner Ring Width | 11/32 in |
| I.D. | 5/8 in |
| Rows of Balls | Single |
| Radial Internal Clearance | C3 |
| Width | 11/32 in |
| Cage Material | Steel |
| No. in Set | Single Bearing |
| Bearing Material | Steel |
| Dynamic Load Rating | 1,700.00 lbf |
| Static Load Rating [Max] | 682.00 lbf |
| Snap Ring | No Snap Ring |
| O.D. | 1 3/8 in |
| Outer Ring Width | 11/32 in |
| Rolling Element | Ball |
| Temperature Range [Max] | 275 °F |
| Ball Material | Steel |
| Capacity | Standard Capacity |
| icNumber | 7696226 |
| Seal Material | Metal |
| Temperature Range [Min] | -30 °F |
| O.D. Type | Straight |
| Closure Type | 2 Shields |
| Rolling Element Material | Steel |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| No. of Rows | 1 |
| Origin | Single Row Radial |
| Relubricatable | No |
| Bearing Type | Radial |
| Internal Clearance | C0 |
| Locking Device | No Locking Device |
| Contact Angle | 0° |
| Open Width | 9/32 in |
| Enclosure | Double Shielded |
| Seal Type | Non-Contact Seals |
| Precision Class | ISO P0 |
| Lubricant | Polyurea Base |
| Precision Level | Standard (ABEC 1) |
| Preload Level | None |
| Cage Type | Metal |
| Overall Width | 0.344 in, 9 mm |
| Precision | Standard |
| Inch/Metric | Inch Bore |
| Fillet Radius | 0.031 in |
| Fillet Radius Cone | 0.024 in, 0.61 mm |
| Bore Type | Round Bore |
| Closed Width | 11/32 in |
| Weight | 0.088 LB |
| EAN or UPC | 87796044739 |
| NSN Number | 3110-00-155-8448 |
