Find a Service Center
Alternate Products
- 0.75 in Inner Diameter
- 1.625 in Outer Diameter
- Single Row
- 0.438 in Overall Width
- 1 Shield, Open
description
- Extra small, 30 Metric series ball bearings can sustain radial, thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement. Some sizes in this series are available in stainless steel.When ordering, these are denoted by a prefix A before the bearing number. (e.g.: A38K)
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
features
- Versatile and provide an easy interchange for operational efficiency
- Well balanced, all purpose bearing with deep races and uninterrupted shoulders for higher load capability
- Carry radial and axial loads in either direction or combined loads, saving space and cost
- Help electric motor applications run quieter
| Cage Type | Metal |
| Bore Type | Round Bore |
| Bearing Material | Steel |
| Pre Lubricant | None |
| Outer Ring Width | 7/16 in |
| Inner Ring Width | 7/16 in |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Rolling Element Material | Steel |
| Seal Type | Non-Contact Seals |
| Material | Steel |
| Relubricatable | No |
| Static Load Rating [Max] | 1000 lbf |
| Snap Ring | No Snap Ring |
| I.D. | 3/4 in |
| Precision | Standard |
| Cage Material | Steel |
| Capacity | Standard Capacity |
| Seal Material | Metal |
| Locking Device | No Locking Device |
| Rows of Balls | Single |
| Precision Class | ISO P0 |
| Bearing Type | Radial |
| No. of Rows | 1 |
| Preload Level | None |
| icNumber | 7699230 |
| Inch/Metric | Inch Bore |
| Overall Width | 0.438 in, 11 mm |
| Fillet Radius | 0.031 in |
| Ball Material | Steel |
| Enclosure | Single Shield |
| Lubricant | Oil Preservative |
| Closure Type | 1 Shield, Open |
| O.D. Type | Straight |
| Radial Internal Clearance | C3 |
| Rolling Element | Ball |
| Dynamic Load Rating | 2320 lbf |
| Contact Angle | 0° |
| O.D. | 1.625 in |
| No. in Set | Single Bearing |
| Origin | Single Row Radial |
| Width | 7/16 in |
| Fillet Radius Cone | 0.024 in, 0.61 mm |
| Internal Clearance | C0 |
| Precision Level | Standard (ABEC 1) |
| Weight | 0.26 LB |
| EAN or UPC | 87796044760 |
| NSN Number | 3110-00-293-9047 |
