Find a Service Center
Alternate Products
- Single Row Radial Bearing, 0.75" ID x 1.625" OD x 7/16" Wide, Double Shielded (Non-Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Cage Type | Metal |
| Bore Type | Round Bore |
| Locking Device | No Locking Device |
| Width | 7/16 in |
| No. in Set | Single Bearing |
| Temperature Range [Min] | -30 °F |
| Outer Ring Width | 7/16 in |
| Lubricant | Polyurea Base |
| O.D. Type | Straight |
| Radial Internal Clearance | C3 |
| Inner Ring Width | 7/16 in |
| Rows of Balls | Single |
| Capacity | Standard Capacity |
| O.D. | 1 5/8 in |
| Enclosure | Double Shielded |
| Seal Type | Non-Contact Seals |
| Temperature Range [Max] | 275 °F |
| Inch/Metric | Inch Bore |
| Origin | Single Row Radial |
| Snap Ring | No Snap Ring |
| Contact Angle | 0° |
| Material | Steel |
| Seal Material | Metal |
| Precision Level | Standard (ABEC 1) |
| icNumber | 7697007 |
| Bearing Type | Radial |
| Closed Width | 7/16 in |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Cage Material | Steel |
| I.D. | 3/4 in |
| Ball Material | Steel |
| Open Width | 0.312 in |
| Static Load Rating [Max] | 1,000.00 lbf |
| Preload Level | None |
| Fillet Radius | 0.031 in |
| Dynamic Load Rating | 2,320.00 lbf |
| Precision | Standard |
| Weight | 0.132 LB |
| EAN or UPC | 87796044777 |
| NSN Number | 3110-00-155-8874, 3110-00-825-7002 |
