Find a Service Center
Alternate Products
- Single Row Radial Bearing, 0.75" ID x 1.625" OD x 7/16" Wide, Double Sealed (Contact), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3)
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Enclosure | Double Sealed |
| Outer Ring Width | 7/16 in |
| Dynamic Load Rating | 2,320.00 lbf |
| Closed Width | 7/16 in |
| Preload Level | None |
| Lubricant | Polyurea Base |
| Precision | Standard |
| Locking Device | No Locking Device |
| Open Width | 0.312 in |
| Contact Angle | 0° |
| Seal Type | Contact Seals |
| Bore Type | Round Bore |
| Seal Material | Buna-N |
| Inner Ring Width | 7/16 in |
| Static Load Rating [Max] | 1,000.00 lbf |
| Bearing Type | Radial |
| Width | 7/16 in |
| Cage Material | Steel |
| Precision Level | Standard (ABEC 1) |
| Capacity | Standard Capacity |
| Ball Material | Steel |
| Temperature Range [Min] | -30 °F |
| Radial Internal Clearance | C3 |
| Inch/Metric | Inch Bore |
| icNumber | 7697085 |
| Origin | Single Row Radial |
| Temperature Range [Max] | 275 °F |
| O.D. Type | Straight |
| No. in Set | Single Bearing |
| Rows of Balls | Single |
| Fillet Radius | 0.031 in |
| Snap Ring | No Snap Ring |
| I.D. | 3/4 in |
| Cage Type | Metal |
| O.D. | 1 5/8 in |
| Material | Steel |
| Weight | 0.132 LB |
| EAN or UPC | 87796044784 |
| NSN Number | 3110-00-759-3968 |
