Find a Service Center
Alternate Products
- 0.875 in Inner Diameter
- 1.875 in Outer Diameter
- Single Row
- 0.375 in Overall Width
- 2 Seals
description
- Extra small ball bearings can sustain radial thrust and combined loads proportionate to the capacities of the small shafts for which they are designed. They are especially suitable for use in fractional horsepower motors, domestic appliances, precision instruments, tape recorders and similar devices. These bearings are electric motor quality for applications where extra quietness is a requirement.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
features
- Versatile and provide an easy interchange for operational efficiency
- Well balanced, all purpose bearing with deep races and uninterrupted shoulders for higher load capability
- Carry radial and axial loads in either direction or combined loads, saving space and cost
- Help electric motor applications run quieter
| Seal Type | Contact Seals |
| Ball Material | Steel |
| Bearing Type | Radial |
| Rolling Element Material | Steel |
| Rolling Element | Ball |
| Inner Ring Width | 1/2 in |
| Lubricant | Polyurea Base |
| icNumber | 7698129 |
| Enclosure | Double Sealed |
| Cage Material | Steel |
| Precision | Standard |
| Temperature Range [Min] | -30 °F |
| Width | 1/2 in |
| Seal Material | Buna-N |
| Preload Level | None |
| Outer Ring Width | 1/2 in |
| Rows of Balls | Single |
| Capacity | Standard Capacity |
| Open Width | 3/8 in |
| Closed Width | 1/2 in |
| Contact Angle | 0° |
| Overall Width | 0.375 in, 10 mm |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| O.D. | 1 7/8 in |
| Origin | Single Row Radial |
| Bore Type | Round Bore |
| Temperature Range [Max] | 275 °F |
| Fillet Radius | 0.031 in |
| I.D. | 7/8 in |
| Precision Level | Standard (ABEC 1) |
| Fillet Radius Cone | 0.024 in, 0.61 mm |
| Static Load Rating [Max] | 1,120.00 lbf |
| Precision Class | ISO P0 |
| Dynamic Load Rating | 2,500.00 lbf |
| Bearing Material | Steel |
| Snap Ring | No Snap Ring |
| Inch/Metric | Inch Bore |
| Relubricatable | No |
| Material | Steel |
| Cage Type | Metal |
| Closure Type | 2 Seals |
| O.D. Type | Straight |
| Internal Clearance | C0 |
| Locking Device | No Locking Device |
| No. of Rows | 1 |
| Radial Internal Clearance | C3 |
| No. in Set | Single Bearing |
| Weight | 0.29 LB |
| EAN or UPC | 87796074729 |
