TAK1

TAK Series Cast Iron Pillow Block

Item #102199770

1" Shaft, 1.3125" Base to Center, Tri-Ply Shroud Seals, Eccentric Collar, Non-Expansion Type

Auto Replenish

each One-time purchase

Alternate Products

Fafnir TAS1

TAS Series Cast Iron 2-Bolt Ball Bearing Pillow Block

Item #101020333

each

Compare

Product Details

1" Shaft, 1.3125" Base to Center, Tri-Ply Shroud Seals, Eccentric Collar, Non-Expansion Type

Recommended for industrial applications where normal loads are encountered. They ensure the user the advantages of a compact, one-piece housing, which can be mounted in any position. The pillow blocks are self aligning at mounting with the spherical O.D. of the bearing fitting into a corresponding spherical housing seat. These units are prelubricated and ready for immediate installation. A grease fitting provides for relubrication if required. Self-locking collars are supplied with all units.

Specifications

Bolt Hole Spacing	4 1/8 in
Bearing Design	Non-Expansion
Bearing Type	Ball Bearing
Base Length	5 1/2 in
Shaft Dia.	1 in
Bolt Size	3/8 in
Collar No.	S1100K
Housing Material	Cast Iron
Mounted Unit Duty	Normal-Duty
Lubrication	Relubricatable
Insert Type	Steel Insert
Outer Ring Size	205
Dynamic Load Rating	3,450.00 lbf
Base Height	15/32 in
Center Line to Base Dimension [Min]	1 5/16 in
Inch/Metric	Inch Bore
Bolt Holes	2
Locking Device	Eccentric Locking Collar
Seal Type	Tri-Ply Shroud Seals
Bolt Hole Length	13/16 in
Pillow Block Type	Thru-Bolt
Bolt Hole Width	7/16 in
Base Width	1 15/32 in
Collar O.D.	1 1/2 in
Overall Width	1 49/64 in
Bearing Insert	G1100KPPB
Series	TAK Series
Housing Construction	1 Piece
End Type	Open End
Housing Height	2 3/4 in
Weight	2.0 LB
EAN or UPC	87796057524