Find a Service Center
- Single Row Radial Bearing, 1.251" Hex ID x 3.14961" OD x 1 7/16" Wide, Double Sealed (Tri-Ply), Standard Precision (ABEC 1), Steel Cage, Greater Than Normal Clearance (C3), Self-Aligning OD
- Ag Duty
description
- This series is designed to be used either for outer or inner ring rotation in low speed, moderatly loaded applications, primarily in agricultural implements and conveyors. The main advantage of these bearings is ease of mounting
- except for end-wise positioning by adjacent parts, no collars, setscrews or other locking devices are required to lock the inner ring to the hex shaft. The tolerances of the hex bore in this series are suitable for mounting on cold rolled hex shafting. These bearings utilize the R type shroud seal.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
| Precision | Standard |
| Rows of Balls | Single |
| Seal Type | Tri-Ply Shroud Seals |
| Locking Device | No Locking Device |
| Dynamic Load Rating | 8130 lbf |
| Ball Material | Steel |
| Inch/Metric | Inch Bore |
| Outer Ring Width | 18 mm |
| Cage Material | Steel |
| O.D. | 3.14961 in |
| Temperature Range [Max] | 275 °F |
| Material | Steel |
| Temperature Range [Min] | -30 °F |
| Lubricant | Polyurea Base |
| Enclosure | Double Sealed |
| Precision Level | Standard (ABEC 1) |
| Static Load Rating [Max] | 4460 lbf |
| Inner Ring Width | 1 7/16 in |
| Seal Material | Buna-N |
| O.D. Type | Spherical |
| Snap Ring | No Snap Ring |
| No. in Set | Single Bearing |
| Radial Internal Clearance | C3 |
| Bore Type | Hex Bore |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Cage Type | Metal |
| I.D. | 1 1/4 in |
| Origin | Single Row Radial |
| Contact Angle | 0° |
| Bearing Type | Radial |
| Preload Level | None |
| Capacity | Standard Capacity |
| Weight | 1.57 LB |
| EAN or UPC | 87796041387 |
