- 1.567 in Inner Diameter
- 4 in Outer Diameter
- Single Row
- 1.75 in Overall Width
- 2 Seals
description
- Tri-Ply Seal ball bearings are designed for environments where severe contamination is present such as agricultural tillage equipment.The one-piece Tri-Ply Seals incorporate a highly effective seal design moded to an exterior shroud cap to provide exceptionally effective protection against the loss of lubricant and the entrance of wet or abrasive contaminants.A seven piece Tri-Ply construction is standard on certain sizes.The shroud cap nests closely with the outside seal and helps protect the rubber seal members from wrappage and abrasion. A feature of these bearings is their balanced design identified by deep races, large balls and extra wide or heavy, shock-resitant inner and outer rings.The use of Tri-Ply Seal bearings simplifies housing designs,and their extra inner ring width provides greater support on the shaft.For speeds in excess of 500 rpm, consult the Engineering Department.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
features
- Versatile and provide an easy interchange for operational efficiency
- Well balanced, all purpose bearing with deep races and uninterrupted shoulders for higher load capability
- Carry radial and axial loads in either direction or combined loads, saving space and cost
- Help electric motor applications run quieter
| Enclosure | Double Sealed |
| Material | Steel |
| Rolling Element Material | Steel |
| Ball Material | Steel |
| No. in Set | Single Bearing |
| Internal Clearance | C3 |
| Radial Internal Clearance | C3 |
| I.D. | 1 1/2 in |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Ball Dia. | 7/16 in |
| Temperature Range [Min] | -30 °F |
| Preload Level | None |
| Temperature Range [Max] | 275 °F |
| Lubricant | Polyurea Base |
| Rows of Balls | Single |
| Inch/Metric | Inch Bore |
| Bore Type | Square Bore |
| Bearing Material | Steel |
| Overall Width | 1.75 in, 44.45 mm |
| Inner Ring Width | 1 3/4 in |
| Locking Device | No Locking Device |
| O.D. Type | Straight |
| Bearing Type | Radial |
| Contact Angle | 0° |
| Relubricatable | No |
| Precision | Standard |
| O.D. | 4 in |
| No. of Balls | 10 |
| Snap Ring | No Snap Ring |
| Rolling Element | Ball |
| Closure Type | 2 Seals |
| Precision Level | Standard (ABEC 1) |
| Dynamic Load Rating | 11000 lbf |
| Static Load Rating [Max] | 6550 lbf |
| Cage Material | Steel |
| Seal Type | Tri-Ply Seals |
| Seal Material | Buna-N |
| Cage Type | Metal |
| Origin | Single Row Radial |
| Capacity | Standard Capacity |
| No. of Rows | 1 |
| Precision Class | ISO P0 |
| Fillet Radius Cone | 0.059 in, 1.5 mm |
| Outer Ring Width | 1 7/16 in |
| Weight | 3.56 LB |
| EAN or UPC | 87796042063 |

