- 1.531 in Inner Diameter
- 3.937 in Outer Diameter
- Single Row
- 1.313 in Overall Width
- 2 Seals
description
- Tri-Ply Seal ball bearings are designed for environments where severe contamination is present such as agricultural tillage equipment.The one-piece Tri-Ply Seals incorporate a highly effective seal design moded to an exterior shroud cap to provide exceptionally effective protection against the loss of lubricant and the entrance of wet or abrasive contaminants.A seven piece Tri-Ply construction is standard on certain sizes.The shroud cap nests closely with the outside seal and helps protect the rubber seal members from wrappage and abrasion. A feature of these bearings is their balanced design identified by deep races, large balls and extra wide or heavy, shock-resitant inner and outer rings.The use of Tri-Ply Seal bearings simplifies housing designs,and their extra inner ring width provides greater support on the shaft.For speeds in excess of 500 rpm, consult the Engineering Department.
applications
- General industrial
- Automotive
- Agricultural
- Chemical
- Utilities
features
- Versatile and provide an easy interchange for operational efficiency
- Well balanced, all purpose bearing with deep races and uninterrupted shoulders for higher load capability
- Carry radial and axial loads in either direction or combined loads, saving space and cost
- Help electric motor applications run quieter
| Temperature Range [Min] | -30 °F |
| Capacity | Standard Capacity |
| No. of Rows | 1 |
| Cage Material | Steel |
| Internal Clearance | C3 |
| Relubricatable | No |
| Fillet Radius Cone | 0.059 in, 1.5 mm |
| Radial Internal Clearance | C3 |
| O.D. Type | Spherical |
| Preload Level | None |
| Overall Width | 1.313 in, 33 mm |
| Bearing Material | Steel |
| Ball Material | Steel |
| Static Load Rating [Max] | 6550 lbf |
| Material | Steel |
| Origin | Wide Inner Ring |
| Bearing Type | Radial |
| Dynamic Load Rating | 11000 lbf |
| Enclosure | Double Sealed |
| Precision Level | Standard (ABEC 1) |
| Temperature Range [Max] | 275 °F |
| I.D. | 1 1/2 in |
| Bore Type | Square Bore |
| Seal Material | Buna-N |
| Inner Ring Width | 1 5/16 in |
| Cage Type | Metal |
| Rolling Element | Ball |
| Rows of Balls | Single |
| O.D. | 3.93701 in |
| Locking Device | No Locking Device |
| No. of Balls | 10 |
| Inch/Metric | Inch Bore |
| Outer Ring Width | 1 5/16 in |
| Rolling Element Material | Steel |
| Ball Dia. | 9/16 in |
| Lubricant | Polyurea Base |
| Precision Class | ISO P0 |
| Snap Ring | No Snap Ring |
| Precision | Standard |
| Closure Type | 2 Seals |
| Stamping | 100MS |
| Contact Angle | 0° |
| No. in Set | Single Bearing |
| Radial Internal Clearance Specification | Greater Than Normal Clearance |
| Seal Type | Tri-Ply Seals |
| Weight | 2.43 LB |
| EAN or UPC | 87796042018 |

