Find a Service Center
Alternate Products
AMI Bearings Inc.
KHLP211-35
2-3/16" NARR ECCENTRIC COLLAR LOW BASE PILLOW BLOCK SINGLE ROW BALL BEARING
Item #101460026
AMI Bearings Inc.
UCLP211-35
Wide Inner Ring Cast Iron Housing Material Pillow Block
Item #101809189
- 2.1875" Shaft, 2.4375" Base to Center, Contact Seals, Setscrew Locking, Non-Expansion Type
description
- Created to handle stringent food handling requirements and serve in highly corrosive applications. All assembly components have been carefully selected to comply with all applicable federal food processing requirements without compromising bearing performance needs. These units are dimensionally stable under load and can operate in continuous temperatures up to 250 °F (brief exposure up to 350 °F).The finish will not scrape or flake off during use.
applications
- Agriculture
- Fans and blowers
- Food processing
- Conveyors
| Housing Height | 4 29/32 in |
| Bolt Size | 5/8 in |
| Bolt Holes | 2 |
| Bolt Hole Spacing | 6 15/16 in |
| Insert Type | Steel Insert |
| Pillow Block Type | Thru-Bolt |
| Inch/Metric | Inch Bore |
| Series | YAK Series |
| Overall Width | 2 7/16 in |
| Seal Type | Contact Seals |
| Bolt Hole Spacing Range [Min] | 5 25/32 in |
| End Type | Open End |
| Bearing Type | Ball Bearing |
| Base Width | 2 5/16 in |
| Housing Construction | 1 Piece |
| Housing Material | Cast Iron |
| Mounted Unit Duty | Normal-Duty |
| Shaft Dia. | 2.1875 in |
| Length Through Bore | 2.1875 in |
| Locking Device | Setscrew Locking Collar |
| Bearing Design | Non-Expansion |
| Lubrication | Relubricatable |
| Collar O.D. | 2.747 in |
| Base Height | 3/4 in |
| Bolt Hole Spacing Range [Max] | 8 3/32 in |
| Base Length | 8 3/4 in |
| Bearing Insert | GY1203KRRB |
| Weight | 8.87 LB |
| EAN or UPC | 87796157590 |
