Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- 7/8-14 Prort Size
- SAE O-Ring Port
- 4 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- Five mounting styles
- Low-speed spool
- Nine shaft options
- Speed sensors
| Displacement (in³/rev) | 4.5 |
| RPM [Min] | 760 rpm |
| Case Drain | None |
| Material | Cast Iron |
| Seal Material | Buna-N |
| Flow [Max] | 15 gal/min |
| Displacement | 74 cm3/Rev |
| Mount Type | 4 Bolt |
| Port Code | A |
| Recommended System Working Temperature [Min] | -30 °F |
| Duty | Standard-Duty |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Motor Type | Spool Valve |
| Paint Code | A |
| Seal Options | Standard |
| Rotation | Standard Rotation |
| Paint | Primer Low Gloss Black |
| Design Code | 9 |
| Brake Type | Hydraulic |
| Inlet Pressure [Max] | 2500 psi |
| Special Features Assembly Code | 0 |
| Output Torque at Rated PSI (inch/pounds) | 1044 in lb |
| Series | H Series |
| Output Shaft Code | 01 |
| Port Location | Side Port |
| Output Shaft Type | Straight |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Bolt Circle Dia. | 3 1/4 in |
| Flow Rate | 57 lpm |
| Shaft Type | Straight w/ Woodruff Key |
| Pilot Diameter | 1.75 in |
| Recommended System Working Temperature [Max] | 180 °F |
| Pressure [Max] | 1800 psi |
| Flange Orientation | Standard |
| Mounting Holes | 3/8-16 |
| Port Type | SAE O-Ring |
| Motor Element | Gerotor |
| Mounting Hole Size | 3/8-16 UNC-2B |
| Intermittent Pressure [Max] | 165 bar |
| Mounting Type Code | B |
| Viscosity Recommendation | 100 Saybold Universal Second |
| Maximum Speed @ Continuous Flow | 760 rpm @ 15 gal/min |
| Port Size | 7/8-14 |
| Torque | 118 Nm |
| Front Seal Kit If Available | 60540-000 |
| Corrosion Resistant | No |
| Splines | 0 |
| Port Size & Location | SAE-10 Side |
| Case Drain Code | 0 |
| RPM [Max] | 760 rpm |
| Special Features Hardware Code | 00 |
| Weight | 11.1 LB |
