Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- 7/8-14 Prort Size
- SAE O-Ring Port
- 4 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- Five mounting styles
- Low-speed spool
- Nine shaft options
- Speed sensors
| Brake Type | Hydraulic |
| Port Type | SAE O-Ring |
| Paint Code | A |
| Output Torque at Rated PSI (inch/pounds) | 2673 in lb |
| Mounting Type Code | B |
| Port Size & Location | SAE-10 Side |
| Output Shaft Type | Straight |
| Front Seal Kit If Available | 60540-000 |
| Pilot Diameter | 1.75 in |
| Inlet Pressure [Max] | 2500 psi |
| Case Drain | None |
| Shaft Type | Straight w/ Woodruff Key |
| Special Features Hardware Code | 00 |
| Intermittent Pressure [Max] | 138 bar |
| Case Drain Code | 0 |
| Rotation | Standard Rotation |
| RPM [Max] | 243 rpm |
| Design Code | 9 |
| Duty | Standard-Duty |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Displacement (in³/rev) | 14.1 |
| Paint | Primer Low Gloss Black |
| Displacement | 231 cm3/Rev |
| Viscosity Recommendation | 100 Saybold Universal Second |
| Mounting Hole Size | 3/8-16 UNC-2B |
| Port Code | A |
| Recommended System Working Temperature [Min] | -30 °F |
| Series | H Series |
| Bolt Circle Dia. | 3 1/4 in |
| Flow [Max] | 15 gal/min |
| Flange Orientation | Standard |
| Motor Type | Spool Valve |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Output Shaft Code | 01 |
| Motor Element | Gerotor |
| Mounting Holes | 3/8-16 |
| Flow Rate | 57 lpm |
| Seal Material | Buna-N |
| Corrosion Resistant | No |
| Material | Cast Iron |
| Seal Options | Standard |
| RPM [Min] | 243 rpm |
| Port Size | 7/8-14 |
| Maximum Speed @ Continuous Flow | 243 rpm @ 15 gal/min |
| Mount Type | 4 Bolt |
| Splines | 0 |
| Special Features Assembly Code | 0 |
| Port Location | Side Port |
| Torque | 302 Nm |
| Pressure [Max] | 1450 psi |
| Recommended System Working Temperature [Max] | 180 °F |
| Weight | 13.0 LB |
