Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- 7/8-14 Prort Size
- SAE O-Ring Port
- 2 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- Five mounting styles
- Low-speed spool
- Nine shaft options
- Speed sensors
| Pilot Diameter | 3.25 in |
| Special Features Assembly Code | 0 |
| Port Code | A |
| Flow [Max] | 15 gal/min |
| Rotation | Standard Rotation |
| Front Seal Kit If Available | 60540-000 |
| Output Shaft Type | Straight |
| Recommended System Working Temperature [Max] | 180 °F |
| Mount Type | 2 Bolt |
| Intermittent Pressure [Max] | 138 bar |
| RPM [Max] | 243 rpm |
| Pressure [Max] | 1450 psi |
| Series | H Series |
| Flow Rate | 57 lpm |
| Paint | Primer Low Gloss Black |
| Paint Code | A |
| Corrosion Resistant | No |
| Port Location | Side Port |
| Brake Type | Hydraulic |
| Displacement (in³/rev) | 14.1 |
| Torque | 302 Nm |
| Case Drain Code | 0 |
| Port Size & Location | SAE-10 Side |
| Material | Cast Iron |
| RPM [Min] | 243 rpm |
| Mounting Hole Size | 0.54 in |
| Bolt Circle Dia. | 4.19 in |
| Mounting Type Code | A |
| Case Drain | None |
| Motor Element | Gerotor |
| Mounting Holes | 0.535 in |
| Seal Material | Buna-N |
| Shaft Type | Straight w/ Woodruff Key |
| Inlet Pressure [Max] | 2500 psi |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Output Shaft Code | 01 |
| Maximum Speed @ Continuous Flow | 243 rpm @ 15 gal/min |
| Seal Options | Standard |
| Design Code | 9 |
| Displacement | 231 cm3/Rev |
| Special Features Hardware Code | 00 |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Viscosity Recommendation | 100 Saybold Universal Second |
| Flange Orientation | Standard |
| Recommended System Working Temperature [Min] | -30 °F |
| Port Type | SAE O-Ring |
| Splines | 0 |
| Port Size | 7/8-14 |
| Motor Type | Spool Valve |
| Output Torque at Rated PSI (inch/pounds) | 2672.92 in lb |
| Duty | Standard-Duty |
| Weight | 13.3 LB |
