Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- 7/8-14 Prort Size
- SAE O-Ring Port
- 2 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- Five mounting styles
- Low-speed spool
- Nine shaft options
- Speed sensors
| Port Type | SAE O-Ring |
| Flange Orientation | Standard |
| Inlet Pressure [Max] | 2500 psi |
| Shaft Type | Straight w/ Woodruff Key |
| Series | H Series |
| Recommended System Working Temperature [Max] | 180 °F |
| Special Features Hardware Code | AA |
| Mounting Holes | 0.535 in |
| Displacement | 36 cm3/Rev |
| Port Size | 7/8-14 |
| Bolt Circle Dia. | 4.187 in |
| Pressure [Max] | 1800 psi |
| Output Torque at Rated PSI (inch/pounds) | 496 in lb |
| Splines | 0 |
| Special Features Assembly Code | 0 |
| Seal Material | Buna-N |
| Paint | Primer Low Gloss Black |
| Output Shaft Type | Straight |
| Recommended System Working Temperature [Min] | -30 °F |
| Flow [Max] | 10 gal/min |
| Geroler Options | Free Running |
| Mounting Hole Size | 0.54 in |
| Seal Options | Standard |
| Case Drain Code | 0 |
| Brake Type | Hydraulic |
| Front Seal Kit If Available | 60540-000 |
| Material | Cast Iron |
| Port Location | Side Port |
| Rotation | Standard Rotation |
| Duty | Standard-Duty |
| Motor Element | Gerotor |
| RPM [Min] | 1021 rpm |
| Mount Type | 2 Bolt |
| Mounting Type Code | A |
| Port Code | A |
| Paint Code | A |
| Maximum Speed @ Continuous Flow | 1021 rpm @ 10 gal/min |
| Design Code | 9 |
| Corrosion Resistant | No |
| Port Size & Location | SAE-10 Side |
| Flow Rate | 38.65 lpm |
| Displacement (in³/rev) | 2.2 |
| Output Shaft Code | 01 |
| Torque | 41.44 Nm |
| Case Drain | None |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Special Features | Free Running Gerotor |
| Intermittent Pressure [Max] | 165 bar |
| Geroter/Geroler Options | Free Running |
| Motor Type | Spool Valve |
| RPM [Max] | 1021 rpm |
| Viscosity Recommendation | 455 Saybold Universal Second |
| Paint/Packaging | Primer Low Gloss Black, Individual Box |
| Pilot Diameter | 3.25 in |
| Weight | 11.55 LB |
