Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- 1/2-14 Prort Size
- NPTF Port
- 4 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- Five mounting styles
- Low-speed spool
- Nine shaft options
- Speed sensors
| Motor Element | Gerotor |
| Design Code | 9 |
| Flow Rate | 38 lpm |
| Flow [Max] | 10 gal/min |
| Output Shaft Code | 01 |
| Duty | Standard-Duty |
| Maximum Speed @ Continuous Flow | 1021 rpm @ 10 gal/min |
| Geroter/Geroler Options | Free Running |
| Bolt Circle Dia. | 3 1/4 in |
| Special Features | Free Running Gerotor |
| Pressure [Max] | 1800 psi |
| Port Type | NPTF |
| Intermittent Pressure [Max] | 165 bar |
| Port Size | 1/2-14 |
| Recommended System Working Temperature [Min] | -30 °F |
| RPM [Min] | 1021 rpm |
| Port Location | Side Port |
| Paint Code | A |
| Mount Type | 4 Bolt |
| Brake Type | Hydraulic |
| Port Code | B |
| Mounting Holes | 3/8-16 |
| Recommended System Working Temperature [Max] | 180 °F |
| Splines | 0 |
| Series | H Series |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Displacement (in³/rev) | 2.2 |
| Pilot Diameter | 1.75 in |
| RPM [Max] | 1021 rpm |
| Case Drain | None |
| Mounting Type Code | B |
| Front Seal Kit If Available | 60540-000 |
| Mounting Hole Size | 3/8-16 UNC-2B |
| Motor Type | Spool Valve |
| Flange Orientation | Standard |
| Rotation | Standard Rotation |
| Viscosity Recommendation | 100 Saybold Universal Second |
| Special Features Hardware Code | AA |
| Geroler Options | Free Running |
| Paint | Primer Low Gloss Black |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Seal Material | Buna-N |
| Inlet Pressure [Max] | 2500 psi |
| Port Size & Location | 1/2 in NPTF Side |
| Output Torque at Rated PSI (inch/pounds) | 495.64 in lb |
| Output Shaft Type | Straight |
| Seal Options | Standard |
| Case Drain Code | 0 |
| Special Features Assembly Code | 0 |
| Torque | 56 Nm |
| Displacement | 36 cm3/Rev |
| Shaft Type | Straight w/ Woodruff Key |
| Material | Cast Iron |
| Corrosion Resistant | No |
| Weight | 11.2 LB |
