Find a Service Center
- Spool Valve Motor
- Cast Iron Material
- 1/2-14 Prort Size
- NPTF Port
- 2 Bolt Mount
description
- Small but powerful, Eaton spool valve motors have the perfect combination of features for a variety of demanding applications, from harvesting equipment to food processing plants. With hydrodynamic journal bearings optimized for long life, these spool valve motors distribute pressurized fluid via integrated valve slots into the Gerotor or Geroler® orbit gear set. This results in a spool valve section that can be optimized for low-flow low-speed requirements, keeping equipment performing smoothly.
applications
- Agricultural augers, Harvesters, Seeders, Industrial sweepers and floor polishers
features
- Compact yet powerful
- Extended bearing life
- Increased shaft seal
options
- Five mounting styles
- Low-speed spool
- Nine shaft options
- Speed sensors
| Motor Element | Gerotor |
| Special Features Hardware Code | 00 |
| Mounting Holes | 0.535 in |
| Duty | Standard-Duty |
| Maximum Speed @ Continuous Flow | 469 rpm @ 15 gal/min |
| Shaft Type | Straight w/ Woodruff Key |
| RPM [Max] | 469 rpm |
| Displacement | 120 cm3/Rev |
| Recommended System Working Temperature [Min] | -30 °F |
| Viscosity Recommendation | 100 Saybold Universal Second |
| Front Seal Kit If Available | 60540-000 |
| Port Location | Side Port |
| Port Size & Location | 1/2 in NPTF Side |
| Material | Cast Iron |
| Mounting Hole Size | 0.54 in |
| Port Type | NPTF |
| Displacement (in³/rev) | 7.3 |
| Output Shaft Type | Straight |
| Recommended System Working Temperature [Max] | 180 °F |
| Output Shaft Code | 01 |
| Port Code | B |
| Rotation | Standard Rotation |
| Special Features Assembly Code | 0 |
| Intermittent Pressure [Max] | 165 bar |
| Inlet Pressure [Max] | 2500 psi |
| Pilot Diameter | 3.25 in |
| Seal Material | Buna-N |
| Flow Rate | 57 lpm |
| Output Torque at Rated PSI (inch/pounds) | 1699 in lb |
| Brake Type | Hydraulic |
| Corrosion Resistant | No |
| Case Drain Code | 0 |
| Paint | Primer Low Gloss Black |
| Port Size | 1/2-14 |
| Case Drain | None |
| Design Code | 9 |
| Paint/Packaging | Low Gloss Black, Individual Box |
| Splines | 0 |
| Flow [Max] | 15 gal/min |
| RPM [Min] | 469 rpm |
| Flange Orientation | Standard |
| Paint Code | A |
| Series | H Series |
| Bolt Circle Dia. | 4.19 in |
| Torque | 192 Nm |
| Motor Type | Spool Valve |
| Seal Options | Standard |
| Pressure [Max] | 1800 psi |
| Mount Type | 2 Bolt |
| Shaft Size & Type | 1 in x 1/4 in Straight |
| Mounting Type Code | A |
| Weight | 12.1 LB |
