Find a Service Center
Boston Gear
F713-40-B5-G
700 Series 40:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #102133809
- 0.25 Input Motor hp
- 700 Series
- 1.33 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Media Mapping Output | G |
| Style | Right Angle |
| Output Torque | 307 lb-in |
| Output Bore Shaft Dia. | 0.625 in |
| Bolt Center Length x Bolt Center Width | 3 1/4 in x 2 in |
| Box Length | 4 1/4 in |
| Output Torque Rating Range [Min] | 300 lb-in, 35 Nm |
| Worm Position | Universal |
| Output (Shaft or Bore) Size | 5/8 in |
| Output Shaft Projection | Solid Left Output |
| Input HP @ RPM | 0.31 hp @ 1750 rpm, 0.18 hp @ 1150 rpm |
| Rated Efficiency | 69% |
| Center Distance Code | 713 |
| Base to Centerline of Input Shaft | 3 1/16 in |
| Output RPM @ 1750 rpm Input | 44 rpm |
| Fan Cooled | No |
| Frame | 56C |
| Series | 700 |
| Housing Material | Cast Iron |
| Washdown Duty | No |
| Motor Frame Size | B556C |
| Bolt Center | 3 1/4" x 2" |
| Max. Overhung Load @ RPM | 200 lb/in @ 1750 rpm, 200 lb/in @ 1150 rpm |
| Lubrication | None |
| Box Width | 4.03 in |
| Base Mounting Attachment | No Base |
| Input (Shaft or Bore) Size | 5/8 in |
| Output Configuration | Left Output |
| Input Power Rating | 0.31 hp, 0.231 kW |
| Output RPM @ Input RPM | 44 rpm @ 1750 rpm |
| Center Distance | 1.33 in |
| Input Motor HP | 0.25 |
| Standard | AGMA Service Class II |
| Output Speed | 43.8 rpm |
| Bolt Pattern | 3.25 x 2 |
| Torque Out @ 1750 rpm | 307 in lb |
| Output Torque @ RPM | 307 in lb @ 1750 rpm, 265 in lb @ 1150 rpm |
| Family Name | F |
| Base to Centerline of Output Shaft | 1.72 in |
| Max. Thrust Load @ 1150 rpm | 300 lb/in |
| Media Mapping Style | F |
| Base | No |
| Input Configuration | C-Face Quilled |
| Material | Cast Iron, Standard Paint |
| Output Torque Rating Range [Max] | 499 lb-in, 59 Nm |
| Use With | 713 |
| Torque Out @ 1150 rpm | 265 in lb |
| Ratio | 40:1 |
| Frame Size | 56C |
| Max. Thrust Load @ RPM | 300 lb/in @ 1750 rpm, 300 lb/in @ 1150 rpm |
| Bore Code | B5 |
| Max. Overhung Load @ 1750 rpm | 200 lb/in |
| Motor Application | General Purpose |
| Box Height | 4 21/32 in |
| Shaft Assembly Code | G |
| HP @ RPM | 0.1666667 hp @ 1800 rpm, 0.1666667 hp @ 1200 rpm |
| Output Shaft | Solid |
| Reduction Type | Single |
| Weight | 13.1 LB |
| EAN or UPC | 781711518885 |
